Installing a truck toolbox is one of the great ways that can save your vehicle from the damages, rust, and scratches that your truck can get from loose cargos. Aside from that, it can also help you in keeping your cargo and gear from the harsh weather, which will extend the lifespan of your tools. It is advisable to make use of a truck bed liner before you perform establishing your truck toolbox for your bed to be protected. When you already have your truck bed liner, then keep on reading this article and enjoy it!
When the installation is done, you will have the great toolbox fastened securely. It only means that you will not move around when you are riding on trails or rough roads. With the use of toolkits, it will keep your equipment and gear safely inside an organized and lockable box. Several toolboxes come up with different sizes and shapes. These are also made up of the stainless and aluminum steels. If you have bought a stainless steel type of toolbox, you might require some help since irons are much more substantial compared to the aluminum organizers.
So, if you are one of those individuals out there who want to learn how to install truck toolboxes without drilling, then this post is perfect for you. So, without further ado, let us dive into the step-by-step guide of toolbox installation.
Before we start to install your preferred truck toolboxes, ensure that you have the proper gear. The following are the standard gears that you will need before the truck toolbox installation.
Materials Needed:
- Included hardware, such as screws, bolts, and nuts
- Work gloves
- Cordless drill or screwdrivers
- Measuring tape
- Thick or protective clothing
If you think that you still need other types of materials that are not included in the list, then you are allowed to grab and use it.
Gather the Materials
The first thing that you should do before you perform the truck toolbox installation is to gather all the needed materials. Usually, when you buy a truck toolbox, it comes up with the foam type and extra padding materials. If you are planning to purchase extra padding, it must have similar dimensions as your purchased truck toolbox. If you want to get accurate measurements, you might consider using a measuring tape.
Measuring
When it comes to measuring, it is recommended to use a measuring tape to ensure that your purchased toolbox is perfect for your truck. Check the location where you are planning to install your toolkit. If all of these fit perfectly, then you are now ready to install your truck toolbox.
Lay Down the Foam
The third step is a very straightforward one. Get the foam equipment that is either you purchased from the market or packed with your purchase and lay it down on the location you want to install your toolbox in. For mounting, ensure that the foam material is amended to the accurate measurements, which are a preparation for the truck toolbox installation.
Anchor your Toolbox
The last step will be the toolbox anchoring to the truck bed. When you are going to mount your toolbox, you are securing the tools inside of it. To anchor your toolkit, ensure that the box is suitable to the tonneau cover. If your toolbox is constructed from plastic, make sure that it has holes for the nuts and bolts to be aligned into it.
If you are going to install a metal-made toolbox, you must use the proper hardware. A metal-made toolbox is being installed with the use of a J-bolt. The J-bolt will be attached to the holes and make sure that it is being placed accurately. Take note that the foam padding material is aligned correctly inside and underneath the toolbox.
Conclusion
Truck toolbox installation is quite easy to work. But, if you are a first-timer, I am sure that upon reading this how-to article, you gained some information on how to install a truck toolbox properly and without drilling. Take note that you need to put proper pressure so that your truck toolbox installation will be done perfectly. So, what are you waiting for? Start your truck toolbox installation right now!
